Wurth PTFE Dry Lubricant

$25.99

Wurth PTFE Dry Lubricant – 893550 is a transparent, non-contaminating lubricant for use on metal, plastic and rubber. Wurth PTFE Dry Lubricant is for dry lubrication of sliding parts where oils, greases and similar materials would cause soiling. It provides a transparent, non-soiling, anti-friction coating. Use Wurth PTFE Dry Lubricant as a dry application lubricant where dirt and other substances will not stick to the worked area. It is resistant against water, gasoline, oil, weak acids and alkalis. Film thickness of 0.01 mm allows use even with the small tolerance on precision engineering. Drying time is 5 to 10 minutes and hardening time is 30 minutes. It can be used as a separation agent.

Description

Wurth PTFE Dry Lubricant – 893550 is a transparent, non-contaminating lubricant for use on metal, plastic and rubber. Wurth PTFE Dry Lubricant is for dry lubrication of sliding parts where oils, greases and similar materials would cause soiling. It provides a transparent, non-soiling, anti-friction coating. Use Wurth PTFE Dry Lubricant as a dry application lubricant where dirt and other substances will not stick to the worked area. It is resistant against water, gasoline, oil, weak acids and alkalis. Film thickness of 0.01 mm allows use even with the small tolerance on precision engineering. Drying time is 5 to 10 minutes and hardening time is 30 minutes. It can be used as a separation agent.

Applications:
Sliding roofs, Sunroof cables, Door hinges, Electrical antennas, Locks, Ball bearings, Electrical switches, Bicycle shoes which clip into the bike pedal.

Properties
– Transparent, non-contaminating lubricant for metal, plastic, rubber, etc.
– Withstands small to medium loads
– Useful as a mold release agent
– Temperature range -292ºF to +464ºF
– Set-up: 10 min. Hardens: 30 min.
– Silicone free
– Great for motorcycle drive belts

Features
– Transparent
– Non-contaminant lubricant
– Resistant to water, acids and alkalis
– Limited resistance to petrol and oil

Application
Before use, shake the canister well. Apply a coat thinly and evenly from about 15-20cm. The surfaces to be treated must be dry and free from dust, oil and grease.

Technical Data
Dust-dry in 5-10 min (+68?F, 50% r.h.). Temperature resistance -292?F to +500?F (temporary).

Additional information

Size

10 oz. (296ml)

Reviews

There are no reviews yet.

Be the first to review “Wurth PTFE Dry Lubricant”

You may also like…